dh R75

Roadheading machine (weight class 70 t) with optional integrated drilling and bolting device

Due to a machine height of 2,500 mm, a total weight of 70 t and installed cutting power of 200 kW the R75 roadheader is ideally suited for the challenges posed by development drivage work under severe operating conditions. It allows cutting of roadway profiles up to 31 m². The optional integrated drilling and bolting system makes for quick installation of rock bolts and additionally offers drilling of boreholes in direction of the face for exploration or pre-lining in case of difficult roof conditions.

features and accessories

 

  • low-height design telescopic

  • cutting boom

  • transversal cutting head / longitudinal cutting head

  • high stability during cutting by an automatic balancing system

  • online monitoring and data analysis system

  • low ground pressure

  • flameproof or non-flameproof electrics

  • radio-remote controls for roadheader and drilling/bolting device

  • drilling/bolting device with rotary drills dh DR or drifter dh DP15

  • drill feed systems for various drilling/bolting applications

  • operator's cabin (FOPS) (optional with air conditioning)

  • closed loop cooling system

  • water mist spray system

  • steal arch manipulator

  • profile control system

  • diesel powerpack for tramming

  • air compressor

  • loading apron extensions (fixed/slewable)

  • slewable service platforms

  • swivel conveyor (vertically/horizontally slewable)

  • swivel belt conveyor

  • bridge belt conveyor

  • cable reel

  • various back-end systems

Data sheet

electric components mit/ohne Schlagwetterschutz
total weight approx. (with bolting rig) 76,5 t
cutting power 200 kW
total power 360 kW
length 11700 mm
width 3000 mm
height (with drill rig) 2500 mm
cutting cross section 31 m²
rock cutting ability (UCS) ≤ 120 MPa
width of loading apron (min.) 4400 mm
conveyor throat 780 x 500 mm
width of crawler tracks 800 / 900 mm
ground pressure (with bolting rig) 0,14 / 0,12 MPa
ground clearance 200 mm
gradeability (longitudinal) 18°
gradeability (transversal)