dh R60

Roadheading machine (weight class 60 t) with optional integrated drilling and bolting device

Due to a machine height of 2,200 mm, a total weight of 61 t and installed cutting power of 200 kW the R60 roadheader is ideally suited for driving roadways and tunnels with low roof heights and small to medium cross sections. The optional integrated drilling and bolting system makes for quick installation of rock bolts and additionally offers drilling of boreholes in direction of the face for exploration or pre-lining in case of difficult roof conditions.

features and accessories

 

  • low-height design telescopic

  • cutting boom

  • transversal cutting head / longitudinal cutting head

  • high stability during cutting by an automatic balancing system

  • online monitoring and data analysis system

  • low ground pressure

  • flameproof or non-flameproof electrics

  • radio-remote controls for roadheader and drilling/bolting device

  • drilling/bolting device with rotary drills dh DR or drifter dh DP15

  • drill feed systems for various drilling/bolting applications

  • operator's cabin (FOPS) (optional with air conditioning)

  • closed loop cooling system

  • water mist spray system

  • steal arch manipulator

  • profile control system

  • diesel powerpack for tramming

  • air compressor

  • loading apron extensions (fixed/slewable)

  • slewable service platforms

  • swivel conveyor (vertically/horizontally slewable)

  • swivel belt conveyor

  • bridge belt conveyor

  • cable reel

  • various back-end systems

Data sheet

total weight approx. (with bolting rig) 67,5 t
cutting power 200 kW
total power 360 kW
length 10115 mm
width 3000 mm
height 2200 mm
cutting cross section 30,5 m²
rock cutting ability (UCS) ≤ 100 MPa
width of loading apron (min.) 3400 mm
conveyor throat 780 x 420 mm
width of crawler tracks 800
ground pressure (with bolting rig) 0,12 MPa
ground clearance 200 mm
gradeability (longitudinal) 18°
max. gradeability (transversal)